Smart composite materials are usually in the molding process, the sensing material, the actuating material is tightly integrated into the prepreg lay-up, wet sheet lay-up, fiber lay-up, fiber winding and resin transfer molding (RTM) composite materials, and through the integrated controller, the com

Basalt fiber is an innovative material extracted from natural volcanic stone, made by high temperature melting at 1450℃ to 1500℃ and platinum rhodium alloy wire drawing technology. Its strength is comparable to high-strength S-type glass fiber, and the cost is lower. This fiber fills the gap between

According to the announcement of the State Intellectual Property Office, SinOMA Technology Co., Ltd. applied for a project entitled "a low-pressure glue injection device suitable for pultrusion process", the public number CN117799193A, the application date is December 2023.According to the announcem

10 days ago, there has been only a decline in the glass fiber market, suddenly there are two "unusual" emerged, sheet yarn and felt yarn strong rise. Then there was a panic downstream, and prices rose steadily under the impetus of strong stocking by the products factory.

On March 18, 2024, Jiaxing Airport Economic Demonstration Zone Pilot Reform Zone (Wangdian Town) 2024 key project launch activities, high quality industry and Hengyida Composite Materials Co., Ltd. 12,000 tons of glass fiber reinforced composite material project groundbreaking ceremony

Extruded composite materials are high-performance fiber-reinforced polymer (FRP) composites manufactured using a continuous process called extrusion. In this process, continuous fibers (such as glass or carbon) are pulled through a bath of thermosetting resin (such as epoxy, polyester, or

In recent years, the research progress of unsaturated polyester resin in foreign countries is rapid, and new products are emerging in an endless stream. For example: Low shrinkage resin, corrosion resistant resin, strong toughness resin, low water absorption unsaturated polyester resin, transp

1. Anti-aging, high strengthFRP profiles use glass fiber and its fabric as reinforcing materials. After being bonded with resin, no lint is exposed, and are formed by mechanical pultrusion and heat curing. Therefore, they are resistant to bending, bending and deformation.2. Corrosion resistance and

Doors and windows are the weak link in the thermal insulation of the building envelope. The energy lost through the exterior windows of the house is very serious, which is the main reason for affecting the thermal environment of the building and causing excessive energy consumption. Vigorously devel

1. The Application of Polyurethane in Building Doors and WindowsPolyurethane is a heat-resistant, corrosion-resistant, fluffy and soft polymer material that is widely used in building doors and windows. As an excellent insulating material, polyurethane can not only increase the thermal insulation pe